Installation Under Sink - Alb Filter Element User Manual

INSTALLATION UNDER SINK

Warning:
For installations under sinks and other indoor areas in
the household, a water stop system must be installed
upstream. This protection serves to stop the flow of
water in the event of water leaks at the housing. If
you have any questions, please contact your plumber.
Way of proceeding:
1. Before starting the installation, please close the water
supply on the relevant valve. (A)
2. Unscrew the cold water supply hose of your angle
valve. (B)
3. Remove the filter housing from its packaging.
4. Now screw a second flex hose connection onto the
angle valve ( ). (C)
12
B
A
Connection sets available at www.alb-filter.com
Shop-Category: Accessories
C
13