Alb Filter Element User Manual page 10

Version B
S/N 0000001 These cartridges are fitted with
a press fit in the bottom of the
case.
a. Carefully pull the cartridge out
Alb
®
f i l t e r
Made in Germany
b. Insert the new cartridge into
c. With slight turning movements
18
of the press fit with slight turn-
ing movements.
the filter housing with the hol-
der facing downwards.
press them into the bottom of
the housing.
S/N 0000001
Active
Alb
®
Active
f i l t e r
Alb
®
f i l t e r
Made in Germany
Made in Germany Alb
®
f i l t e r
Made in Germany
Note:
Avoid placing the covers at an slanted angle on the
threads, as this could damage them. Check the tight-
ness of the filter housing after each filter change.
4. Close the upper or lower housing cover again until
there is almoste no visible gap left.
5. Screw the filter housing to the fitting or the flex hose
connection.
6. Check the filter housing and all connected compo-
nents for leaks.
7. The Alb filter is now ready for use.
Please observe the direction of water flow, marked
with the arrow and „IN"!
19