Installing An Sd Card - Panasonic FZ-A3 Series Operating Instructions - Reference Manual

Installing an SD card

•
When installing or removing an SD card, place the unit on a flat surface.
•
If a battery is installed, remove it (page 16).
1.
Open the card slot cover (A), and then insert the microSD card into the microSD card slot (B).
•
Install only microSD cards.
•
Hold the microSD card so that the metal terminals are facing down, and insert with the notch facing
in the same direction of the circled area in the illustration below.
2.
Slide the microSD card until you hear a click.
•
To remove a microSD card, push it slightly into the slot to eject it.
3.
Close the card slot cover until you hear a click.
Operating Instructions - Reference Manual
Getting started
13