NOTE: The message may be slightly different according to the connected input
signal.
This means that the monitor cannot synchronize with the signal that it is receiving from
the computer. See
ranges addressable by this monitor. Recommended mode is 3840 x 2160.
You will see the following message before the DDC/CI function is disabled:
When the monitor enters the Power Save mode, the following message appears:
Activate the computer and wake up the monitor to gain access to the OSD.
NOTE: The message may be slightly different according to the connected input
signal.
If you press any button other than the power button, the following message will appear
depending on the selected input:
44
|
Operating the Monitor
Monitor Specifications
for the Horizontal and Vertical frequency