Power Pc Board - Mitsubishi Electric DD-5000 Service Manual

1-2-3. Power PC board

1. Peel off the tape (1).
2. Remove the connectors (2) and (3).
3. Release the wire part of the connector with the
binding band (4) tightened.
4. Remove three screws (5).
5. Remove two screws (6).
6. Release two claws and remove the power supply PC
board (7).
Power PC board (7)
Screws (5)
Claws
Fig. 2-1-11
Connector (2)
Tape (1)
Screws (6)
Connector (3)
Binding band (4)
2-5
1-2-4. Front PC Board
1. Remove the front panel. (Refer to item 1-1-4.)
2. Remove four screws (1) and remove the front display
PC board (2)
3. Remove two screws (3) and remove the power switch
PC board (4).
Power SW
Screws (3)
PC board (4)
Fig. 2-1-12
Front display
PC board (2)
Screws (1)