Replacement Of Mechanical Parts; Cabinet Replacement; Top Cover; Clamper Stay - Mitsubishi Electric DD-5000 Service Manual

PART REPLACEMENT AND
ADJUSTMENT PROCEDURES
CAUTIONS BEFORE STARTING SERVICING
Electronic parts are susceptible to static electricity and may easily damaged, so do not forget to take a proper ground-
ing treatment as required.
Many screws are used inside the unit. To prevent missing, dropping, etc. of the screws, always use a magnetized
screwdriver in servicing. Several kinds of screws are used and some of them need special cautions. That is, take care
of the tapping screws securing molded parts and fine pitch screws used to secure metal parts. If they are used improp-
erly, the screw holes will be easily damaged and the parts can not be fixed.

1. REPLACEMENT OF MECHANICAL PARTS

1-1. Cabinet Replacement

1-1-1. Top Cover

1. Remove five screws (1) and remove the top cover (2).
Screw (1)
Fig. 2-1-1
SECTION 2
Top cover (2)
Screws (1)
Screw (1)
2-1

1-1-2. Clamper Stay

<Removal>
1. Remove two screws (1).
2. Release two claws and remove the clamper stay (2).
Screws (1)
Clamper
stay (2)
Claw
A
Spring
Claws
Fig. 2-1-2
Clamper stay (2)
Clamper stay (2)
Claw