Sony HT-A5000 Help Manual page 54

Help Guide
Sound Bar
HT-A5000
About the Connection of the Headphones
You may not be able to adjust the volume level depending on the BLUETOOTH compatible headphones.
Input of BLUETOOTH is disabled when
is set to [Off] or [Transmitter].
You can register up to 9 BLUETOOTH devices. If a 10th BLUETOOTH device is registered, the oldest connected
BLUETOOTH device will be overwritten by the new one.
The speaker system can display up to 15 detected BLUETOOTH devices in the [Device List].
You cannot change the sound effect or settings while transmitting sound to the BLUETOOTH compatible
headphones.
Playback of audio/music on the BLUETOOTH device is delayed compared to that on the speaker system due to the
characteristics of BLUETOOTH wireless technology.
You can enable or disable the reception of LDAC audio from the BLUETOOTH device in [Bluetooth Settings].
[Setup] - [Advanced Settings] - [Bluetooth Settings] - [Bluetooth Mode]
5-029-482-11(1) Copyright 2021 Sony Corporation
54