Supported Hdmi Video Formats - Sony HT-A5000 Help Manual

Help Guide
Sound Bar
HT-A5000

Supported HDMI Video Formats

Video formats supported by this speaker system are as follows.
8K 24/25/30/50/60 Hz
4K 24/25/30/50/60/100/120 Hz
1080p 24/25/30/50/60/100/120 Hz
1080i 50/60 Hz
720p 24/30/50/60 Hz
576p 50 Hz
480p 60 Hz
About the [HDMI Signal Format] setting
When [Setup] - [Advanced Settings] - [HDMI Settings] - [HDMI Signal Format] is set to [Enhanced format (4K120,
8K)], all video formats supported by this speaker system can be input.
When [HDMI Signal Format] is set to [Enhanced format], the video format is limited to 4K 60Hz 4:4:4, 4:2:2, etc.
When [HDMI Signal Format] is set to [Standard format], the video format is limited to 4K 60Hz 4:2:0, 4K 24Hz, etc.
About the HDMI cable to use
Use the supplied HDMI cable to connect to a TV.
When using an Ultra High Speed HDMI Cable that supports 48 Gbps, it supports all video formats supported by this
speaker system.
When using a Premium High Speed HDMI Cable with Ethernet that supports 18 Gbps, it supports video formats up to 4K
60Hz 4:4:4, 4:2:2, etc.
About the 3D signal
The following video format is compatible with 3D signal in Side-by-Side (Half) format.
1080i 50/60 Hz
The following video formats are compatible with 3D signal in Frame packing and Over-Under (Top-and Bottom) format.
1080p 24 Hz
720p 50/60 Hz
About the OPTIONS button and the On-Screen Display (OSD) of the speaker system
In the case of the following signals, the OPTIONS button does not work and the On-Screen Display (OSD) of the
speaker system is not displayed.
The signal with resolution of 4096 × 2160p
The 3D signal in Side-by-Side (Half) format or Over-Under (Top-and-Bottom) format
Notes on HDMI jack and HDMI connections
Use an HDMI-authorized cable.
We do not recommend using an HDMI-DVI conversion cable.
Audio signals (sampling frequency, bit length, etc.) transmitted from an HDMI jack may be suppressed by the
connected device.
Sound may be interrupted when the sampling frequency or the number of channels of audio output signals from the
playback device is switched.
When [Setup] - [Advanced Settings] - [HDMI Settings] - [Video output for PIP/PBP-displayed TV] is set to [On]
and TV input is selected, video signals via the HDMI IN jack are output from the HDMI OUT (TV eARC/ARC) jack.
This speaker system supports "TRILUMINOS."
155