Table of Contents
Advertisement
CHARGING SYSTEM TEST RESULTS
RESULT ON PRINTER
REMEDY
Charging system normal/Diode ripple normal Charging system is normal
Generator does not supply charging current to battery
No charging voltage
=> Check belts, connection between generator and battery
Replace belts or cable or generator as necessary
Generator does not supply charging current to battery and electrical
Low charging voltage
load to system fully
=> Check belts and generator and replace as necessary
The voltage from generator to battery is higher than normal limit
during voltage regulating.
High charging voltage
=> Check connection and ground and replace regulator as necessary
=> Check electrolyte level in the
battery
One or more diodes in the generator is not functioning properly
Excess ripple detected
=> Check generator mounting and belts and replace as necessary
Hide quick links:
Advertisement
Table of Contents
