Table of Contents
Advertisement
2009 > G 2.7 DOHC >
REMOVAL
1. Disconnect the battery negative terminal first, then the positive terminal.
2. Disconnect the alternator connector, and remove the cable from alternator "B" terminal.
3. Remove the drive belt.
4. Pull out the through bolt and then remove the alternator(A).
5. Installation is the reverse of removal.
DISASSEMBLY
1. Remove the alternator cover(A) using a screw driver(B).
2. Remove the slip ring guide(A).
3. Loosen the mounting bolts(B) and disconnect the brush holder assembly(C).
4. Remove the rectifler(A) with 4 screws.
Hide quick links:
Advertisement
Table of Contents
