Open The Chassis; Upgrade System Memory - Intel NUC7i3DNHNC User Manual

User Guide for NUC7i3DNHNC
This guide tells you how to:
Upgrade memory (RAM)
•
Change/install an M.2 SSD
•
Change/install a 2.5-inch drive
•
Use a VESA mount bracket
•
Connect power
•
Set up Microsoft® Windows® 10
•
• Install the latest device drivers and software
•
Recover the operating system

Open the Chassis

Unscrew the four corner screws on the bottom of the chassis and lift the cover.

Upgrade System Memory

The Intel NUC Kits NUC7i3DNHNC have two 260-pin DDR4 SO-DIMM sockets,
one 4GB DDR4 2133 MHz SO-DIMM.
To upgrade memory, be sure to select memory modules that meet these requirements:
 1.2V low voltage memory
 2133 MHz SO-DIMMs
 Non-ECC
Find compatible memory modules in the
3
Intel® Product Compatibility Tool.
pre-installed with