Intel NUC7i3DNHNC User Manual page 6

User Guide for NUC7i3DNHNC
Find compatible 2.5" drives in the
1. Unscrew the four screws holding the current drive in the bay.
2. Remove the pre-installed drive from the drive bay.
3. Slide the new 2.5" drive into the drive bay, ensuring the SATA connectors are fully seated into
the connectors of the SATA daughter card (A).
4. Secure the drive into the drive bay with the four screws that were used in step 1. Set the drive
bay bracket down inside the chassis (C).
6
Intel Product Compatibility Tool.