Using C-Pen With Your Pc; Installing C-Win Software - C Technologies Mobile Information Collector C-Pen User Manual

USING C-PEN WITH YOUR PC

A working connection with a PC is required to install and
remove applications in C-Pen. To enable this communica-
tion certain hardware and software must be installed and
configured properly on your PC.
The following is required for IR communication:
1. An IR port. Laptops often have a built-in IR port. Refer
to your PC's manual to find out whether your PC is
equipped with an IR port and if so, where it is located.
Most desktop PCs do not have a built-in IR port. In this
case you must use an external IR adapter. Contact your
retailer if you do not have an IR adapter.
2. Infrared drivers are included on the C-Pen CD. It is
crucial to install the infrared driver properly.
3. C-Win Software. This software is installed from the
C-Pen CD.
The following is required for cable communication:
1. Cable. The cable is included in the C-Pen package.
2. COM port (serial port). The cable should be plugged
into an available COM port on your PC.
3. C-Win Software. This software is installed from the C-
Pen CD.

Installing C-Win Software

C-Win Software and the infrared driver – if required – are
installed when you run the installation programs on the C-
Pen CD. The menu option Documentation on the C-Pen
CD contains the User's Guide and Help. The installation
71