General Settings; Displaying The Settings Screen - Sony MAS-A100 Manual

6. Check the gain limit.
The gain limit lamps may be lit as the microphone gain increases.
To avoid deterioration in audio quality, set the microphone gain in the range so
that the gain limit lamps are not lit or that only one lamp is lit.
A single gain limit lamp indicates that the speech reinforcement level is reaching
the limit to suppress audio feedback while maintaining audio quality. Two gain
limit lamps indicate that the speech reinforcement level has exceeded the limit
and audio quality has deteriorated.
If a larger speech reinforcement level is needed, review the MAS-A100
installation environment and calibrate again.
7. Press [Close].
The microphone gain is set as the default, and calibration ends.

5.6. General settings

Use MASM-1 to set the name and installation location of MAS-A100 units, cancel
registration, and set up MAS-A100 access for the web UI.

Displaying the settings screen

1. Open the [Settings] tab of MASM-1.
66