Table of Contents
Advertisement
Operator's Manual
ELECTRICAL AND HYDRAULIC SYSTEM DIAGRAMS
Care should be taken to identify all potential hazards and comply with applicable safety procedures
before beginning work. Ensure that all system pressure and electrical power have been removed
before attempting to work on the electrical or hydraulic systems. Follow all applicable lockout/tagout
procedures.
The load must be removed, and the platform either positively and adequately supported or fully
lowered, before any work is performed on the lift table.
Only qualified individuals trained to understand mechanical devices and their associated electrical and hydraulic
circuits, as well as the hazards associated with them, should attempt troubleshooting and repair of this equipment.
EHLTX Power Unit Assembly.
Representative drawing. Contact the factory for replacement parts for your specific model. ALWAYS have the product
serial number or model number on hand when calling the factory.
TABLE CAPACITY
1000 lb, 2000 lb
(EHLTX-####-1-39, EHLTX-####-2-39)
3000 lb, 3500 lb
(EHLTX-####-3-39, EHLTX-####-3.5-39)
Table of Contents
2/2/21
MOTOR VOLTAGE
115 VAC 1 Ø
208-230 VAC 1 Ø
230/460 VAC 3Ø
115 VAC 1 Ø
208-230 VAC 1 Ø
230/460 VAC 3Ø
Copyright 2021, Vestil Manufacturing Corp.
EHLTX, MANUAL.DOCX
POWER UNIT PART NUMBER
99-660-159-001
99-660-159-002
99-660-163-004
99-660-160-001
99-660-160-002
99-660-164-004
Page 12 of 32
Advertisement
Table of Contents
