MULTIQUIP Stow C10SH8 Operation And Parts Manual
  1. Manuals
  2. Brands
  3. MULTIQUIP Manuals
  4. Construction Equipment
  5. Stow C10SH8
  6. Operation and parts manual
MULTIQUIP Stow C10SH8 Operation And Parts Manual

MULTIQUIP Stow C10SH8 Operation And Parts Manual

Concrete mixer with honda gx240u1qa2 gasoline engine
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
OPERATION AND PARTS MANUAL
MODELS
C10SH8 (STEEL)
C10PH8 (PLASTIC)
CONCRETE MIXER
(HONDA GX240U1QA2 GASOLINE ENGINE
Revision #0 (03/06/09)
THIS MANUAL MUST ACCOMPANY THE EQUIPMENT AT ALL TIMES.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Stow C10SH8 and is the answer not in the manual?

Questions and answers

Related Manuals for MULTIQUIP Stow C10SH8

Summary of Contents for MULTIQUIP Stow C10SH8

  • Page 1 OPERATION AND PARTS MANUAL MODELS C10SH8 (STEEL) C10PH8 (PLASTIC) CONCRETE MIXER (HONDA GX240U1QA2 GASOLINE ENGINE Revision #0 (03/06/09) THIS MANUAL MUST ACCOMPANY THE EQUIPMENT AT ALL TIMES.
  • Page 2 We sell worldwide for the brands: Genie, Terex, JLG, MultiQuip, Mikasa, Essick, Whiteman, Mayco, Toro Stone, Diamond Products, Generac Magnum, Airman, Haulotte, Barreto,...

  • Page 3: Proposition 65 Warning

    PROPOSITION 65 WARNING Engine exhaust some its constituents, and some dust created by power sanding, sawing, grinding, drillingandotherconstructionactivities contains chemicals known to the State of California to cause cancer, birth defects and other reproductive harm. Some examples of these chemicals are: Leadfromlead-basedpaints.

  • Page 4: Silicosis/Respiratory Warnings

    SILICOSIS/RESPIRATORY WARNINGS WARNING WARNING SILICOSIS WARNING RESPIRATORY HAZARDS Grinding/cutting/drilling of masonry, concrete, metal and Grinding/cutting/drilling of masonry, concrete, metal and other materials with silica in their composition may give other materials can generate dust, mists and fumes off dust or mists containing crystalline silica. Silica is a containing chemicals known to cause serious or fatal basic component of sand, quartz, brick clay, granite and injury or illness, such as respiratory disease, cancer,...

  • Page 5: Table Of Contents

    TABLE OF CONTENTS C10SH8-PH8 Component Drawings Concrete Mixer Nameplates And Decals ........32-33 Plastic Drum Assembly ........34-35 Proposition 65 Warning ........... 2 Steel Drum Assembly ........36-37 Silicosis/Respiratory Warnings ........ 3 Yoke Assembly ..........38-39 Table Of Contents ............ 4 Frame Assembly ..........

  • Page 6: Safety Information

    SAFETY INFORMATION Do not operate or service the equipment before reading Potential hazards associated with the operation of this the entire manual. Safety precautions should be followed equipment will be referenced with hazard symbols which at all times when operating this equipment. may appear throughout this manual in conjunction with Failure to read and understand the safety safety messages.
  • Page 7  Avoid wearing jewelry or loose fi tting clothes that may recommended by Multiquip for this equipment. Damage snag on the controls or moving parts as this can cause to the equipment and/or injury to user may result.
  • Page 8 SAFETY INFORMATION ENGINE SAFETY (GASOLINE MODELS ONLY) MIXER SAFETY DANGER DANGER   Engine fuel exhaust gases contain poisonous carbon NEVER operate the equipment in an explosive atmosphere or near combustible materials. An monoxide. This gas is colorless and odorless, and can explosion or fi...
  • Page 9 SAFETY INFORMATION FUEL SAFETY (GASOLINE MODELS ONLY) Power Cord/Cable Safety DANGER DANGER   DO NOT start the engine near spilled fuel or combustible NEVER let power cords or cables lay in water. fl uids. Fuel is extremely fl ammable and its vapors can ...
  • Page 10 SAFETY INFORMATION TOWING SAFETY ENVIRONMENTAL SAFETY CAUTION NOTICE   Check with your local county or state safety towing Dispose of hazardous waste properly. regulations, in addition to meeting Department of Examples of potentially hazardous waste Transportation (DOT) Safety Towing Regulations, are used motor oil, fuel and fuel fi...
  • Page 11 NOTES C10SH8-PH8 CONCRETE MIXER • OPERATION AND PARTS MANUAL — REV. #0 (03/06/09) — PAGE 11...

  • Page 12: Specifications

    SPECIFICATIONS Table 1. Mixer Specifi cations Model C10SH8 C10PH8 Drum Material Steel Polyethylene Bag Capacity Drum Capacity — cu.ft. (liters) 9.0 (255) 9.0 (255) Discharge Height — in. cm. 21.5 (55) 21.5 (55) Drum Opening — in. cm. 20.0 (51) 19.2 (49) Drum Depth —...

  • Page 13: Dimensions

    DIMENSIONS OPTIONAL TOW BARS HBC-1 Table 3. Dimensions 2-INCH BALL COUPLER Reference Description Dimension Letter Height 61 in. (1545 mm) Drum height 30 in. (765 mm) Drum width 38.6 in. (980 mm) Drum neck diameter 21.1 in. (535 mm) HLC-1 Width 45.7 in.

  • Page 14: General Information

    Use Table 5 (Mixing Hints) as a guide when mixing concrete for various applications. POWER PLANTS The Stow C10SH8 and C10PH8 mixers are powered by an air-cooled, 4-stroke Honda GX240U1QA2 gasoline engine. Refer to Table 2 for engine specifi cations.

  • Page 15: Components

    COMPONENTS Mixing Drum — The C10SH8 uses a 6 cu. ft steel mixing drum and the C10PH8 uses a 6 cu. ft. plastic mixing drum. This drum is to be used for mixing of concrete. Always clean the drum after each use. DO NOT use this mixing drum for the mixing of volatile liquids.

  • Page 16: Basic Engine

    BASIC ENGINE Fuel Valve Lever — OPEN to let fuel fl ow, CLOSE to stop the fl ow of fuel. Choke Lever — Used in the starting of a cold engine, or in cold weather conditions. The choke enriches the fuel mixture.

  • Page 17: Towing Guidelines

    TOWING GUIDELINES  TOWING SAFETY PRECAUTIONS ALWAYS make sure that the fuel valve lever is in the OFF position (gasoline models only). CAUTION  Check wheel mounting lug nuts with a torque wrench. Check with your county or state safety towing regulations Torque wheel lug nuts as described in the maintenance department before towing your mixer.

  • Page 18: Safety Chain Connection

    SAFETY CHAIN CONNECTION Route the safety chain through the holes just above the CAUTION tow bar, located on each side of the mixer stand. NEVER tow the mixer with the safety chain removed. Loop the chain together and place under the tow bar. The safety chain is intended to prevent complete Secure the loop with the connector link.

  • Page 19: Inspection

    INSPECTION BEFORE STARTING Table 6. Oil Type Season Temperature Oil Type Read safety instructions at the beginning of manual. Summer 25°C or Higher SAE 10W-30 Clean the mixer, removing dirt and dust, particularly the Spring/Fall 25°C~10°C SAE 10W-30/20 engine cooling air inlet, carburetor and air cleaner. Winter 0°C or Lower SAE 10W-10...

  • Page 20: Operation

    OPERATION STARTING THE ENGINE Turn the engine switch (Figure 10) to the ON position. The following steps outline the procedure for starting the engine. Depending on the type of engine employed in the mixer, the steps may vary slightly. Move the fuel shut-off lever (Figure 7) to the ON position.
  • Page 21 OPERATION OPERATION CAUTION To position the tub, make sure the mixer is placed on fi rm level ground, then pull up on the dump latch Placing the shovel all the way inside the drum will cause (Figure 13) and turn the hand wheel until the tub is at the shovel to strike the blades.

  • Page 22: Maintenance (Engine)

    MAINTENANCE (ENGINE) Use Table 7 as a general maintenance guideline when servicing your engine. For more detailed engine maintenance information, refer to the engine owner’s manual supplied with your engine. Table 7. Engine Maintenance Schedule Every 3 Every 6 First Month Every Year or Every 2 Years Description (3)
  • Page 23 MAINTENANCE (ENGINE) MAINTENANCE DANGER Perform the scheduled maintenance procedures as defi ned DO NOT use gasoline as a cleaning solvent because by Table 7 and below: that would create a risk of fi re or explosion. DAILY  ENGINE AIR CLEANER Thoroughly remove dirt and oil from the engine and control area.

  • Page 24: Maintenance (Mixer)

    MAINTENANCE (MIXER) BALL SOCKET AND CLAMP FACE WHEEL BEARINGS If the towing vechicle is equipped with a ball socket, After every 3 months of operation, remove the hub dust smear socket periodically with multi-purpose grease. cap and inspect the wheel bearings (Figure 21). Once This will keep the ball socket well lubricated.
  • Page 25 MAINTENANCE (MIXER) TIRES/WHEELS/LUG NUTS Table 8. Tire Wear Troubleshooting Wear Pattern Cause Solution Tires and wheels are a very important and critical components of the trailer. When specifying or replacing the Adjust pressure to Center trailer wheels it is important the wheels, tires, and axle are Over Infl...
  • Page 26 We sell worldwide for the brands: Genie, Terex, JLG, MultiQuip, Mikasa, Essick, Whiteman, Mayco, Toro Stone, Diamond Products, Generac Magnum, Airman, Haulotte, Barreto,...
  • Page 27 MAINTENANCE (MIXER) Lug Nut Torque Requirements It is extremely important to apply and maintain proper wheel mounting torque on the trailer. Be sure to use only the fasteners matched to the cone angle of the wheel. Proper procedure for attachment of the wheels is as follows: Start all wheel lug nuts by hand.
  • Page 28 NOTES C10SH8-PH8 CONCRETE MIXER • OPERATION AND PARTS MANUAL — REV. #0 (03/06/09) — PAGE 27...

  • Page 29: Troubleshooting (Engine)

    TROUBLESHOOTING (ENGINE) Practically all breakdowns can be prevented by proper information shown below and on the next page. If the problem handling and maintenance inspections, but in the event of cannot be remedied, please leave the unit just as it is and a breakdown, please take a remedial action following the consult our company’s business offi...

  • Page 30: Troubleshooting (Mixer)

    TROUBLESHOOTING (MIXER) Table 11. Mixer Troubleshooting Symptom Possible Problem Solution Check that the ring gear and bearings Defective ring gear? are not worn. Replace as necessary. Check that the pinion gear and bearings Defective pinion gear? Drum rotates rough. are not worn. Replace as necessary. Worn V-belt? Replace V-belt.

  • Page 31: Explanation Of Code In Remarks Column

    A blank entry generally indicates that the item is not sold assembly/kit that can be purchased, or is not available separately or is not sold by Multiquip. Other entries will for sale through Multiquip. be clarifi ed in the “Remarks” Column.

  • Page 32: Suggested Spare Parts

    SUGGESTED SPARE PARTS C10SH8-PH8 CONCRETE MIXER WITH HONDA GX240U1QA2 ENGINE 1 to 3 units Qty. Description 2....EM493399 ....V-BELT 2....29173-001 ....SWITCH, STOP 4....491010 ....RUBBER LATCH ASSY. 1....EM903026 ....BEARING CUP 1....EM903063 ....BEARING CONE 2....492178 ....BEARING, SHAFT 2....EM914288 ....OIL SEAL 1....516592 ....OIL SEAL 4....EM903113 ....BEARING CONE 4....EM903012 ....BEARING CUP 2....3469 ......DUST CAP...

  • Page 33: Nameplates And Decals

    NAMEPLATES AND DECALS WARNING CRUSH HAZARD CRUSH AND CUT HAZARD Keep guards and doors in place. Moving parts can cut Shut-off engine and crush. before inspection SHUT OFF engine or maintenance before putting hands in mixing drum DCL160 WARNING SAFETY INSTRUCTIONS 1.
  • Page 34 NAMEPLATES AND DECALS PART NO. PART NAME QTY. REMARKS 510164 DECAL, STOW A DIVISION OF MULTIQUIP DCL160A DECAL, CRUSH WARNING DCL151 DECAL, WARNING TOWING 504713 DECAL, WARNING SAFETY INSTRUCTIONS 35137 DECAL, READ MANUAL EM948630 DECAL, PUSH TO STOP NAMEPLATE ............1....CONTACT DISCOUNT-EQUIPMENT...
  • Page 35 PLASTIC DRUM ASSY PAGE 34 — C10SH8-PH8 CONCRETE MIXER • OPERATION AND PARTS MANUAL — REV. #0 (03/06/09)
  • Page 36 PLASTIC DRUM ASSY PART NO. PART NAME QTY. REMARKS 516658 GEAR RING 412379 SCREW, CAP 3/8" 511729 SHIM EM969013 NUT, NYLOC 510909 WASHER 510916 DRUM, PLASTIC 511089 SUPPORT BRACKET EM963057 SCREW, CAP 3/8" X 1-1/2" 3019092 WASHER, 3/8" FLAT 510884 BLADE, PLASTIC DRUM 515453 SCREW...
  • Page 37 STEEL DRUM ASSY NOTES MIXING BLADES ARE PART OF DRUM ASSEMBLY. TO RE-ORDER NEW BLADES A COMPLETE MIXING DRUM MUST BE PURCHASED. PAGE 36 — C10SH8-PH8 CONCRETE MIXER • OPERATION AND PARTS MANUAL — REV. #0 (03/06/09)
  • Page 38 STEEL DRUM ASSY PART NO. PART NAME QTY. REMARKS 516658 GEAR RING EM963057 SCREW, CAP 3/8" X 1-1/2" 511730 SHIM 492542 0166 A WASHER, LOCK 3/8" 516575 DRUM, STEEL 516511 CAP, DRUM 516618 O-RING 516678 NUT, KING PIN EM924006 PIN, COTTER 1/8" X 3/4" 504447 WASHER 516495...
  • Page 39 YOKE ASSY. PART OF FRAME PART OF YOKE NOTES SEE PLASTIC OR STEEL DRUM ASSY. PAGE 38 — C10SH8-PH8 CONCRETE MIXER • OPERATION AND PARTS MANUAL — REV. #0 (03/06/09)
  • Page 40 YOKE ASSY. PART NO. PART NAME QTY. REMARKS 491008 FITTING PROTECTOR EM916001 GREASE FITTING 500214 KEY SQUARE 1/4" X 1/4" X 1-1/2" 503915 PINION GEAR 492468 SCREW, SET 5/16" 516654 SUPPORT YOKE 513991 PINION, JACKSHAFT 492178 BEARING, SHAFT EM963692 SCREW, CAP HHCS, 1/2-13 X 1 490970 SNAP RING 514036...
  • Page 41 FRAME ASSY. CHAIN & LINK OPTIONAL TOW BARS PAGE 40 — C10SH8-PH8 CONCRETE MIXER • OPERATION AND PARTS MANUAL — REV. #0 (03/06/09)
  • Page 42 FRAME ASSY. PART NO. PART NAME QTY. REMARKS 514245 GUARD, GEAR WHEEL 3103160 WASHER 492278 BOLT HEAD ROUND 1/4 X 3/8 516668 GEAR, DUMP 492584 NUT, LOCK 1/2" 490895 DUMP LATCH 491008 FITTING PROTECTOR EM916001 GREASE FITTING 492329 BOLT, 1/2" NC X 1-3/4" G2 492259 BOLT, 5/16"...
  • Page 43 HUB/TIRE ASSY. FRAME NOTES: COMPLETE HUB ASSEMBLY INCLUDES ITEMS WITHIN DASHED LINES AND ITEMS 13 AND 14. PAGE 42 — C10SH8-PH8 CONCRETE MIXER • OPERATION AND PARTS MANUAL — REV. #0 (03/06/09)
  • Page 44 HUB/TIRE ASSY. PART NO. PART NAME QTY. REMARKS EM914288 OIL SEAL EM903113 BEARING CONE EM903012 BEARING CUP EM941306 HUB ASSY, 4-BOLT INCLUDES ITEMS W/% EM511159 WASHER, FLAT, .087" THICKNESS EM501299 WASHER, FLAT, .135" THICKNESS 491688 COTTER PIN, 1/8" X 1-1/2" 8164 NUT, SLOTTED HEX JAM 1"-20 516476...
  • Page 45 CABINET ASSY. FRAME ENGINE BASE PLATE PAGE 44 — C10SH8-PH8 CONCRETE MIXER • OPERATION AND PARTS MANUAL — REV. #0 (03/06/09)
  • Page 46 CABINET ASSY. PART NO. PART NAME QTY. REMARKS 514052 CABINET 491010 RUBBER LATCH ASSY. 1307 SCREW, PHP 8-32 X 1/2 PLATED 492312 BOLT, 3/8" NC X 1-1/4" G2 3019092 WASHER, FLAT 3/8" 501028 SPACER EM969013 NUT, NYLOC 3/8" 492357 BOLT, 1/4" NC X 1" G5 EM923057 WASHER, 1/4"...
  • Page 47 ENGINE ASSY. DRIVE PINION SHAFT PART OF CABINET FRAME PAGE 46 — C10SH8-PH8 CONCRETE MIXER • OPERATION AND PARTS MANUAL — REV. #0 (03/06/09)
  • Page 48 ENGINE ASSY. PART NO. PART NAME QTY. REMARKS GX240U1QA2 ENGINE, HONDA 8.0 HP 492378 BOLT, 3/8" NC X 1-3/4" G5 3019092 WASHER, FLAT 3/8" 0166 A WASHER, LOCK 3/8" 1456 NUT, HEX 3/8 - 16 516648 ENGINE BASE PLATE EM963692 BOLT, HHCS 1/2 - 13 X 1-1/2 EM621 WASHER, 1/2"...
  • Page 49 NOTES C10SH8-PH8 CONCRETE MIXER • OPERATION AND PARTS MANUAL — REV. #0 (03/06/09) — PAGE 49...
  • Page 50 We sell worldwide for the brands: Genie, Terex, JLG, MultiQuip, Mikasa, Essick, Whiteman, Mayco, Toro Stone, Diamond Products, Generac Magnum, Airman, Haulotte, Barreto,...

This manual is also suitable for:

Stow c10ph8

Table of Contents