Table of Contents
Advertisement
1. Right baffle
2. Carriage bolt (3/8 x 1 inch)
6
Installing the Baffles for
60-inch Mower Decks
Parts needed for this procedure:
1
Left baffle
1
Center baffle
1
Right baffle
9
Flange nut (3/8 inch)
9
Carriage bolt (3/8 x 1 inch)
Procedure
Note: Loosely install the baffles to align the baffles with all
holes in the mower
(Figure
1. Position the right baffle into the mower.
2. Loosely install the right baffle to the discharge plate
with 1 carriage bolt (3/8 x 1 inch) and 1 flange nut (3/8
inch) as shown in
Figure
3. Loosely install the right baffle to the top of the mower
deck with 1 carriage bolt (3/8 x 1 inch) and 1 flange
nut, (3/8 inch). Refer to
4. Loosely install the right baffle to the mower deck with
1 carriage bolt (3/8 x 1 inch) and 1 flange nut (3/8
inch) as shown in
Figure
3. Left baffle
4. Flange nut (3/8 inch)
9).
9.
Figure 9
and
Figure
10.
9.
Figure 8
5. Center baffle
5. Position the left baffle into the mower.
6. Loosely install the left baffle to the top of the mower
deck with 1 bolt (3/8 x 1 inch) and 1 flange nut (3/8
inch) as shown in
7. Loosely install the left baffle to the mower deck with
1 carriage bolts (3/8 x 1 inch) and 1 flange nuts (3/8
inch) as shown in
8. Loosely install the left baffle to the side of the mower
deck with 1 carriage bolt (3/8 x 1 inch) and 1 flange
nut (3/8 inch) as shown in
8
Figure
9.
Figure
9.
Figure
9.
Advertisement
Table of Contents
