Equipment Set Up; Installation Instructions; Recommended Minimum Clearance; Noise Level - Eloma Joker B Installation And Technical Connections

2.

Equipment set up

Transport of units
 Use elevating truck or fork–lift truck for transport. Transport only on pallets.
 Observe door width and door height when transporting the units.
2.1

Installation instructions

 To prevent injury, always lift the appliance off the pallet with the aid of a second person → risk
of crushing.
 Follow the local regulations and observe the instructions for the installation of kitchen and
shop equipment.
 If using the marine version, attach the additional fastening elements supplied.
 Remove all cartons, packing materials, documents from the interior cabinet.
 No heat or steam sources may be installed underneath the oven.
 There must not be any sources of heat or moisture underneath or in the
immediate vicinity of the appliance (such as deep fat fryers or portable stoves).
 In case of installation close to materials that risk burning, observe the instructions of fire
prevention.
 Minimum distance from sources of heat and moisture: 500 mm
 When using deep fat fryers or portable stoves next to the appliance, make sure that they are kept
at a suitably safe distance from it (based on the radius of action of the shower head). There is a
serious risk of the operator sustaining burns if water is sprayed into hot fat.
 To ensure conformity with NSF, retrofit the device with the Foot Extension Kit 623.
2.2

Recommended minimum clearance

 The machine may only be set up in a location with adequate lighting for users.
 We recommend to install the ovens on top of original Eloma lower racks/supports or wall brackets.
 In case of installations on top of worktables, ensure sufficient stability and load capacity.
(weight of an empty oven approx. 50 kg).
 It is mandatory to set up the appliance in horizontal position. True up minor unevenness with
the vertically adjustable feet.
 Distance to walls on right, left and back side at least 50 mm. In case of installations near to
materials that risk burning, observe the instructions of fire protection.
 The equipment must be secured against tilting and falling down.
 Net weight ca. 65 kg
2.3

Noise level

 The emission value of the noise level is less than 70 dB (A).
2.4

Exhaust air

 A built-in cooling function cools down water and steam of condensation, which runs down the
drain. It is therefore not necessary, however recommended, to install the appliance under a
ventilation hood.
 If such a hood is installed, its design and power rates should comply with the German VDI regulation
2052.
Condensation hood (option)
 An optional condensation hood is available for Eloma combi steamers.
 The condensation hood is controlled fully automatically via the combi steamer.
 During the cooking process, steam is condensed as it passes over air-cooled plate condensers.
6