How To Use The Strap; Loading The Battery - Minox 140 Instructions Manual

How to use the strap (Fig. 1)
The protruding part of the strap adjustment clip can
be used to press the small buttons on the camera.
Loading the Battery (Fig. 2, 3, 4)
This camera cannot be used without a battery.
(1 )Push the switch on the battery compartment
coverla in the direction of the arrow to open the
battery compartment.
(2) Load a new battery, making sure thal the polarity
of the battery is the same as the markings on the
inside of the battery compartment cover. Close
the battery cover with a click.
(3) The battery is supplying enough power for
operation if the battery symbol is shown in black
on the LCD panel alter the power has been turned
on.
(4)Use one CR123A or DL 123A (3V) lithium battery.
1. Sufficient power: battery power symbol displays
a completely black battery image.
2. Low power: battery power symbol displays a 1/2
empty and 1/2 black blinking image other symbols
can be displayed as weil. Il is lime to replace
battery .
3. No power: black 1/2 of the battery power symbol
is blinking and camera can no longer lake
pictures. (Other symbols will disappear).
38