Advertisement
EASY-TO-USE OPERATION
1.
Turn the instrument ON.
2.
Discharge your body by touching a grounded metal object.
3.
Point the aperture toward a grounded object and press the ZERO button.
4.
Aim the aperture toward the target surface at a distance of 1ft. Adjust the distance until the flashing beams of the
LEDs inthe instrument converge. Read the voltage and polarity of the charged surface on the meter display.
For additional measurements, repeat step four.
Maintenance
The battery should be replaced annually, whenever you plan an extended period of unattended monitoring, or
whenever "BAT" appears on the display for more than an instant. To obtain accurate and drift-free readings, the
sensor plate and especially the area around the aperture must be kept absolutely clean at all times. Never touchthe
aperture with anything—not even a cotton swab.
MONROE ELECTROSTATIC FIELDMETER 282H
advancedenergy.com
3
Advertisement
