Table of Contents
Advertisement
Quick Links
Owner's Guide and Installation Manual
Attach sales receipt to this card and retain as your proof of purchase
DATE OF PURCHASE:
MODEL NUMBER:
To register your fixture, please visit our website www.montecarlofans.com
3BTR54XXXXD Series Fan
CUL Model NO. : 3BTR54XXXXD
RETAILER NAME:
RETAILER ADDRESS:
9.9 kgs
21.8 lbs
Total fan weight with light kit
Advertisement
Table of Contents
Related Manuals for Monte Carlo Fan Company 3BTR54 Series
Summary of Contents for Monte Carlo Fan Company 3BTR54 Series
- Page 1 Owner’s Guide and Installation Manual 3BTR54XXXXD Series Fan CUL Model NO. : 3BTR54XXXXD Attach sales receipt to this card and retain as your proof of purchase DATE OF PURCHASE: RETAILER NAME: RETAILER ADDRESS: MODEL NUMBER: To register your fixture, please visit our website www.montecarlofans.com 9.9 kgs 21.8 lbs Total fan weight with light kit...
-
Page 2: Cautions And Warnings
Note: Suitable for use in wet locations when installed in a GFCI protected branch circuit. Tools Required for Assembly (not included): Electrical Tape, Phillips Screwdriver, Pliers, Safety Glasses, Stepladder and Wire Strippers Customer Service 800-969-3347 Customer Service Center 7400 Linder Ave. Skokie, IL 60077 www.montecarlofans.com © 2018 Monte Carlo Fan Company 08/2018... - Page 3 Keep parts. corresponding with the installation step 8. Note: Make sure to tighten the set screws when the decorative plates are in position and fixed with decorative screws in the installation step 8. © 2018 Monte Carlo Fan Company 08/2018...
-
Page 4: Safety Cable Installation
Insert the remote receiver into mounting : If Installing The Secondary Support bracket. Safety Cable in the U.S., Do Not Remove Refer to page 7 for receiver setting. Knockouts In The Outlet Box. © 2018 Monte Carlo Fan Company 08/2018... - Page 5 Attach light pan onto the plate on motor, screws removed in the installation step aligning the keyhole slots on the light pan with the preassembled screws on the plate. Twist clockwise till lock. Reinstall the screw. Tighten all screws securely. © 2018 Monte Carlo Fan Company 08/2018...
- Page 6 Install it onto the light pan with 3 set screws removed in the installation step © 2018 Monte Carlo Fan Company 08/2018...
- Page 7 Take remote transmitter up by pushing it at lower area of the Back side of the transmitter. wall mount cradle The remote transmitter can be held on magnetic metal material by a magnet built in the transmitter. Fig. 2 © 2018 Monte Carlo Fan Company 08/2018...
-
Page 8: Remote Control Setting And Operation
“OFF” button of the transmitter which you are using for at least 10 seconds. You must press the ‘OFF” button within 60 seconds of restoring power to the fan. © 2018 Monte Carlo Fan Company 08/2018... - Page 9 THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES OPERATION IS SUBJECT TO THE FOLLOWING TWO CONDITIONS. (1)THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE AND (2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED, INCLUDING INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION. © 2018 Monte Carlo Fan Company 08/2018...
-
Page 10: Troubleshooting
5.Remove light kit and check the plug connections if they are present. 6.If this fan uses remote controller, make sure dip switches are setting properly and make CAUTION: Make sure main power is turned off before entering switch housing and/or canopy. © 2018 Monte Carlo Fan Company 08/2018... - Page 11 Sep.2018...
Need help?
Do you have a question about the 3BTR54 Series and is the answer not in the manual?
Questions and answers