Review/Test Scale Settings
If you press and
release the TEST key,
the display will show
the scales model
number, version-
revision, and per-
forms a display test.
To review the current
system settings,
press and hold the
TEST until the display
prompts DISP.
Press the ZERO key to
move to the next item
in the menu.
Press the TEST key to
select the displayed
item to run or view.
Model 6712 Point-of-Sale Interface Scale User's Manual
The TEST key located on the front panel lets you
perform some basic system diagnostics, as well
as review the current system settings without
having to access SW-1 switch inside the scale.
When finished running tests or viewing the
settings, press the ZERO key until DONE is
displayed. Then press the TEST key to return to
normal (i.e., weighing) mode of operation.
17