OESD Magic Box Instruction Manual page 29

Magic Box - Design Card Converter
Software Manual
2. Before unplugging the USB cable, double left click the
"Safely Remove Hardware" icon in the lower right corner.
The "Safely Remove Hardware" window will appear.
(Figure 2). The Mini Magic Box will be listed as USB
Embroidery Conversion Box.
Figure 2
Note: If more than one USB device (i.e. Palm Pilot, digital camera, scanner,
printer, etc.) is plugged in, those other devices may also be listed. It is important
to select the correct device prior to disconnecting that device.
3. Click the STOP button to tell the computer this is the device to be
unplugged.
Installation Installation
29