OESD Magic Box Instruction Manual page 13

Magic Box - Design Card Converter
Software Manual
9. Click Install.
(Fig. Inst-3 Below)
Fig. Inst-3
Magic Box Installation
The Magic Box software MUST be installed before connecting the
USB Magic Converter Box to the computer.
The Magic Box will connect directly and be powered by an
available USB port on the computer. The computer supplies all
the power that the Magic Box will need.
Connecting the Magic Box to the computer is very simple. Take the
square end of the USB cable
the USB port on the Magic Box
Next, take the fl at end of the USB cable
Fig. Inst-5A
Fig. Inst-5
10. Click Finish.
Fig. Inst-4
(Fig. Inst-5A Below)
(Fig. Inst-5B Below)
(Fig. Inst-6 Below)
Installation Installation
(Fig. Inst-4)
, and plug it into
.
, and plug it
Fig. Inst-5B
13