Declaration Of Conformity - EdilKamin SERBATOIO 250 Installation, Use And Maintenance Manual

ALARMS
Additional tank empty alarm.
This alarm is displayed when the additional tank is empty (pic 30).
To restore the tank to working order, load the pellets and press button 4.
Pellet supply exhausted alarm.
The alarm is displayed when the programmed pellet load time expires if the pellet level in
the boiler's tank is still below the probe's min. level.
In this case the message "PELLETS EXHAUSTED" will appear on the display and then
after 10 seconds the message "OFF" will appear .
ContrCheck the cause of the pellet supply's exhaustion (motor block, motor failure, conveyor
tube clog, insufficient load time).
To restore the tank to working order, restore the pellet level in the tank and press the 4 button.

DECLARATION OF CONFORMITY

The product conforms to the essential requirements of the following EEC Directives:
- 2006/42/EC
- 2006/95/EC
- 2004/108/EC
Therefore, it is has the CE marking
EDILKAMIN S.p.a.
registered office in Via Vincenzo Monti 47
20123 Milan
USE
Pic. 30
Pic. 31
17