EdilKamin SERBATOIO 250 Installation, Use And Maintenance Manual page 15

Connect the power cable's schuko plug, that comes out of the electronic regulator,
to the network outlet (possibly equipped with a magneto-thermal circuit breaker).
The console unit allows for communication with the electronic regulator by simply
pressing some keys.
A display informs the operator of the load system's operating status.
In the programming mode, the various parameters that can be modified using the keys
are displayed.
NOT USED
Pic. 22 describes the meaning of the symbols located on the
left side of the display.
The activation on the display of one of the led segments,
signals the activation of the corresponding device, according
to the list at the side.
Pic. 24 describes the arrangement of messages during the programming phase or when setting operat-
ing parameters. In particular:
1. The input area displays the programming values entered.
2. The "menu level"
REGULATOR DESCRIPTION
Pic. 21
CLOCK
fig. 23
INPUT
FUNCTION
area, displays the current menu level. Refer to the Menu chapter.
15
BUTTON
1) FEED SCREW GEAR MOTOR
2) NOT CONNECTED
3) NOT CONNECTED
4) PELLET LEVEL (SILOS)
5) NOT CONNECTED
6) NOT CONNECTED
7) NOT CONNECTED
8) PELLET LEVEL (BOILER)
Pic.22
STATUS
MENU LEVEL
Pic. 24
NOT USED
NOT USED
4