Transmit Ringing Tone; Selecting/Deactivating The Ringing Tone; Monitor; Key Lock - Grundig GWT 2000 User Manual

8
OPERATING THE WALKIE-TALKIES

Transmit ringing tone

The ringing tones indicate to other subscribers that you want to talk
to them. A condition for this is that the other subscribers are using the
same channel and CTCSS/CDCSS code.
Send ringing tones.

Selecting/Deactivating the ringing tone

There are 10 ringing tones available for selection. To deactivate the
ringing tone, select the seting "0" (zero).
3 x
Activate programming mode
or ,

Monitor

The Monitor function enables the search for weak signals on the
channel currently set. If you receive an external signal, switch to a free
channel. Always communicate with other subscribers on a free chan-
nel to prevent interference.
,
Monitor the channel
,
End the monitoring function

Key lock

The key lock function prevents inadvertent modification of settings.
When the key lock function is activated, the
display.
Activating
, 3 sec Activate the key lock
Deactivating
, 3 sec Deactivate the key lock

Confirmation signal

The confirmation signal is issued on releasing the
indicates to the caller that you have ended transmission.

Activating/Deactivating the confirmation signal

Switch the walkie-talkie off. Press and hold the
doing so, switch the walkie-talkie on again. If the confirmation signal is
activated, the icon appears in the display.
Select the ringing tone and confirm it
icon appears in the
button. This
button and, while