Advertisement
Model:
LCIT RT5030 (D452)
Replacement procedure
1. Pull out and remove the tray by referring to the procedure in the service manual.
2. Remove the Tray Front Cover. (Screw x4)
3. Remove the Handle Unit. (Screw x4)
IMPORTANT
The screws fixing the Handle Unit also adjust the side-to-side registration. If the
screws are in a specific position, note that position and make sure the screws are
fastened in the same position when reassembling the unit.
T
B
echnical
ulletin
Date:
11-May-12
PAGE: 2/4
No.:
RD452004
Advertisement
