How To Use; Connecting Plug; Set The Temperature - Aroma AHG-1435 Instruction Manual & Recipes

HOW TO USE

ASSEMBLE LID KNOB BEFORE PLACING LID ON GRILL
1. Position the knob guard (flat piece) over the hole in the lid. On the
underneath side of the lid, push the screw through the hole, and then
attach the knob onto the screw.
2. Periodically tighten screw if needed.

CONNECTING PLUG:

1. Place the cooking pan into the base unit with control receptacle in the
opening.
2. Push down until you hear the cooking pan snap into place. Make sure
the pan is locked securely into the base.
PROCEED WITH THE FOLLOWING INSTRUCTIONS
1. PLUG THE UNIT IN:
a. Place the cooking pan into the plastic base with the control
receptacle in the opening.
b. Push the cooking pan down until you hear it snap into place. Make
sure the cooking pan is locked securely in the base.
c. Plug the temperature controller into the socket.
d. Plug the cord into a standard 110/120-voltage outlet.

2. SET THE TEMPERATURE:

a. Turn the temperature controller to the desired setting, the light will
come on indicating the power is on, and will go off when the skillet is
heated to the selected temperature.
3. COOKING:
With the lid on, preheat the grill for 5-10 minutes, and remove lid.
a. Start cooking once the indicator light goes off.
b. It takes approximately 8 minutes to reach the maximum temperature
selection.
c. Cook food to desired doneness.
d. Instructions for steaming: add about 1/3 cup of water on the grill
surface. Place food in the center of the grill surface. Set the
.
:
5