Advertisement
Troubleshooting
Problem
Possible cause
Unit will
Battery pack not charged.
not start.
Battery
Charger not plugged
pack
in.
will not
charge.
Surrounding air temperature
too hot or too cold.
Unit shuts
Battery pack has
off
reached its maximum thermal
abruptly.
limit.
Out of charge. (To maximize
the life of the battery pack it is
designed to shutoff abruptly
when the charge is depleted
Maintenance
Your BLACK+DECKER tool has been designed to operate
over a long period of time with a minimum of maintenance.
Continuous satisfactory operation depends upon proper tool
care and regular cleaning.
Your charger does not require any maintenance apart from
regular cleaning.
Warning! Before performing any maintenance on the tool,
remove the battery from the tool. Unplug the charger before
cleaning it.
Regularly clean the ventilation slots in your tool and
u
charger using a soft brush or dry cloth.
Regularly clean the motor housing using a damp cloth.
u
Do not use any abrasive or solvent-based cleaner.
Regularly open the chuck and tap it to remove any dust
u
from the interior.
Protecting the environment
Z
Separate collection. Products and batteries
marked with this symbol must not be disposed
of with normal household waste.
Products and batteries contain materials that can be recov-
ered or recycled, reducing demand for raw materials.
Please recycle electrical products and batteries accord-
ing to local provisions. Further information is available at
www.2helpU.com
Possible solution
Check battery pack charging
requirements
Plug charger into a working
outlet.
Move charger and battery
pack to a surrounding air tem-
perature of above 40 degrees
F (45ºC) or below 105 degrees
F (+40.5ºC)
Allow battery pack to cool
down.
Place on charger
and allow to charge.
Service Information
BLACK+DECKER offers a full network of company-owned
and authorized service locations throughtout Asia. All
BLACK+DECKER Service Centers are staffed with trained
personnel to provide customers with efficient and reliable
product service.
Whether you need technical advice, repair, or genuine factory
replacement parts, contact the BLACK+DECKER location
nearest to you.
Note
BLACK+DECKER's policy is one of continuous improve-
u
ment to our products and, as such, we reserve the right to
change product specifications without prior notice.
Standard equipment and accessories may vary by country.
u
Product specifications may differ by country.
u
Complete product range may not be available in all
u
countries. Contact your local BLACK+DECKER dealers for
range availability.
ENGLISH
ENGLISH
DEUTSCH
9
Advertisement
