Table of Contents
Advertisement
USING THE PROJECTOR
3D Format
Use this option to select the appropriate 3D format content.
‡
Auto: When a 3D identification signal is detected, the 3D format is selected automatically.
‡
SBS: Display 3D signal in "Side-by-Side" format.
‡
Top and Bottom: Display 3D signal in "Top and Bottom" format.
‡
Frame Sequential: Display 3D signal in "Frame Sequential" format.
3D Sync Invert
Use this option to enable/disable the 3D sync invert function.
Display aspect ratio menu
Aspect Ratio
Select the aspect ratio of the displayed image between the following options:
‡
4:3: This format is for 4:3 input sources.
‡
16:9: This format is for 16:9 input sources, like HDTV and DVD enhanced for Wide screen TV.
‡
16:10 (for WXGA model only): This format is for 16:10 input sources, like widescreen laptops.
‡
LBX: This format is for non-16x9, letterbox source and if you use external 16x9 lens to display 2.35:1
aspect ratio in full resolution.
‡
Native: This format displays the original image without any scaling.
‡
Auto: Automatically selects the appropriate display format.
Note:
Detailed informations about LBX mode:
± Some Letter-Box Format DVDs are not enhanced for 16x9 TVs. In this situation, the image will not look
right when displaying image in 16:9 mode. In this situation, please try to use the 4:3 mode to view the
DVD. If the content is not 4:3, there will be black bars around the image in 16:9 display. For this type of
content, you can use LBX mode to fill the image on the 16:9 display.
± If you use an external anamorphic lens, this LBX mode also allows you to watch a 2.35:1 content (include
Anamorphic DVD and HDTV film source) that supports anamorphic wide is enhanced for 16x9 Display in
a wide 2.35:1 image. In this case, there are no black bars. Light source power and vertical resolution are
fully utilized.
35
English
Advertisement
Table of Contents
