Advertisement
1 Introduction 2
For your safety
2.1
Intended use
1 Introduction
With your choice of the Oasis sunshade stand you have purchased a high-quality product
featuring a patented and unique design that allows you to move the sunshade while in use
to any spot on your terrace, while maintaining an upright posture. Finally you can put up
the sunshade where it is really needed.
Read the information in this manual carefully so you will be able to use your sunshade
stand safely and effectively.
We hope you enjoy your product.
2 For your safety
2.1 Intended use
The sunshade stand is intended only for use as a holding device for sunshades on a level
and solid surface. Use only sunshades that, according to the manufacturer's specifications,
are suitable for the weight class of the sunshade stand, to ensure maximum stability.
The different models of the Oasis sunshade stand may be used only for poles with the
diameters specified in the Technical Data
Model
Specified pole diameters
220 S
1.77 in to 2.68 in
220S with Quick Clamp
1.97 in and 2.17 in
Accessory (QC-2)
The sunshade stand - in moving position - can be moved together with the sunshade on a
level surface
Foreseeable misuse
Misuse can result in dangerous situations. Therefore, never use the sunshade stand
as a stand for objects for which the static requirements are not known
with sunshades that are not suitable for the stand due to the pole diameter or
size
for transporting persons
4
6
Disassembly at the end of season
6 Disassembly at end of season
At the end of the season the sunshade stand should be stored as follows:
1. Remove the sunshade from the mounting tube of the sunshade stand by
– loosening the knurled screws (model: 220S).
– opening the clamping lever (model: 220S with Quick Clamp Accessory).
Storage
2. Store the sunshade stand, if possible, at a location that fulfills the following criteria.
The storage location should be:
– dry
– protected against frost
– level
i
Alternatively, you can cover the sunshade stand with an optional protective
cover.
To prevent the protective cover from becoming loose, pull the cover completely
down to the ground and then draw the rubber straps tight until they are caught
under the protective cove
17
Advertisement
