Download Print this page

Oasis 220S Assembly And Operating Manual

Rolling base

Advertisement

Quick Links

Assembly and Operating Manual
220S
220S with Quick Clamp Accessory
1
20

Advertisement

loading

Summary of Contents for Oasis 220S

  • Page 1 Assembly and Operating Manual 220S 220S with Quick Clamp Accessory...
  • Page 2 Model Permissible pole diameters Illustrations in this manual show the sunshade stand Oasis Rolling Base 130R as an ex- ample. They are intended for general understanding and can differ from the actual model. LiRo S 45 to 68 mm (1.77 in to 2.68 in)
  • Page 3 Care Disposal Table of contens In case of problems Introduction 7 Care For your safety Intended use Scratching of the casing and mounting tube due to incorrect care! Symbols in the manual Do not use aggressive or abrasive cleaners (such as steel wool), which can dama- ge the surface of the sunshade stand.
  • Page 4 Alternatively, you can cover the sunshade stand with an optional protective The different models of the Oasis sunshade stand may be used only for poles with the cover.
  • Page 5 Using the sunshade stand Symboles in the manual Safety notices Inserting the sunshade 5.2 Moving the sunshade stand 2. Open the quick-release clamp by pulling the clamping lever away from the moun- ting tube (Fig. 21). 2.2 Symbols in the manual 3.
  • Page 6 Modell: 220S with Quick Clamp Accessory QC-2 For model 220S with Quick Clamping Accessory QC-2, insert the sunshade as follows: 1. Make sure that the sunshade stand is in standing position, i.e. the telescoping rod...
  • Page 7 • Do not leave the sunshade stand unattended when the sunshade is open. Fastening the mounting tube and the clamp on Oasis 220S with Quick Clamp Accessory QC-2 models Tilted sunshades can unexpectedly turn as a result of the wind, resulting in property dama- 1.
  • Page 8 220S with Quick Clamp Accessory QC 2 Assembly The sunshade stand must be assembled as follows: Mounting tube Quick-release clamp Reducing sleeves Place the blanket, etc.
  • Page 9 Assembly of the sunshade stand Scope of delivery Figures to the assembly instructions Unpacking the sunshade stand The sunshade stand is delivered in five parts (Fig 1): Figure 17 Figure18 Figure 19 1 sunshade stand 4 weight segments Before unpacking, check all packing units for obvious damage from trans- port.
  • Page 10 Figures to the assembly instructions Figure 1 Scope of delivery Figure 2 Figure 3 Figure 9 Figure 10 Figure 11 5 cartons 220S QC2 version 220S QC2 version 220S QC2 version top site bottom site Figure 4 Figure 5 Figure 6 Figure 12 Figure 13 Figure 13.1...