Airlink101 AP671W User Manual page 31

When you select 'AP Bridge-WDS', the following options will be displayed:
Here are descriptions of every setup item:
Band
MAIN ESSID
Multiple ESSID
Channel
Number
Diagram 5: WDS Bridge mode application
Please select the wireless band you wish to use. By selecting
different band setting, you'll be able to allow or deny the wireless
client of a certain band.
If you select 2.4GHz (B), 2.4GHz (N), or 2.4GHz (G), only wireless
clients using the wireless band you select (802.11b, 802.11 Draft-N,
or 802.11g) will be able to connect to this access point.
If you select 2.4GHz (B+G), then only wireless clients using 802.11b
and 802.11g band will be able to connect to this access point.
If you want to allow 802.11b, 802.11g, and 802.11 Draft-N clients to
connect to this access point, select 2.4GHz (B+G+N).
Please input the ESSID (the name used to identify this wireless
access point) here. You can input up to 32 alphanumerical
characters. PLEASE NOTE THAT ESSID IS CASE SENSITIVE.
The access point supports multiple SSID function; up to 3 SSIDs can
be set. If you want to configure additional SSIDs, please click this
button. For detailed descriptions of the function, please refer to
Section 2.4.1.1.
Please select a channel number you wish to use. The channel
number must be same with another wireless access point you wish to
connect.
30