BIOS Setup
Power
▶ Restore AC Power Loss
This setting specifies whether your system will reboot after a power failure or
interrupt occurs. Available settings are:
[Power Off]
[Power On]
[Last State]
▶ Deep Sleep Mode
The setting specifies the deep sleep mode.
** Advanced Resume Events Control **
▶ OnChip GbE/USB/Ring
The item allows the activity of the OnChip GbE/USB/Ring device to wake up the
system from S3/S4 sleep state.
▶ PCIE PME
This field specifies whether the system will be awakened from power saving
modes when activity or input signal of onboard PCIE PME is detected.
▶ RTC
When [Enabled], your can set the date and time at which the RTC (real-time
clock) alarm awakens the system from suspend mode.
3-20
Leaves the computer in the power off state.
Leaves the computer in the power on state.
Restores the system to the previous status
before power failure or interrupt occurred.