Table of Contents
Advertisement
General Editing
Use the arrow keys
scrolling through the selection using the Input Dial
field or press another menu key. Pressing HOME
Selecting the Radio Frequency
The OSMAC satellite has 6 pre-programmed user-selectable radio frequencies. The frequencies are programmed at the
factory or by the distributor prior to delivery of the satellite. However if a frequency change is desired, any of the 6 pre-
programmed frequency channels can be modified to any desired radio frequency.
Important: The base station transmitter and satellite must be set to the same frequency to enable communication.
What's Running
Manual Watering
Scheduled Watering
Communication
Diagnostics
Setting
Channel: 1
Rx Freq1 462.2125MHz
Tx Freq1 462.2125MHza
1.
While at the Home Screen, press
arrows to select Communication and press
2.
Use the
or
arrows to select Radio Menu and press
3.
Use the
or
4.
Use the
or
arrows to select Radio Frequency and press
While the cursor selection is on Channel: 1, press
5.
pre-programmed frequency channels. Once the correct frequency is selected, press
6.
If the desired frequency does not match any of the pre-programmed channels, any of the six channels can be
modified. Follow Step 4 to select the channel you want to modify. Press
Use the
or
arrows to navigate between the frequency digits. Press
number to the desired radio frequency.
Assigning the Satellite Address Number
Each satellite requires a 3-digit address number to enable communication with the central controller and/or a hand-held
radio. The address numbers range from 1 (001) through 255.
What's Running
Manual Watering
Scheduled Watering
Communication
Diagnostics
Setting
1.
While at the Home Screen, press
arrows to select Communication and press
2.
Use the
or
arrows to select Sat Address and press
3.
Use the
or
4.
Use the
or
arrows to set the desired address for the satellite. Satellite address can be set to 001 through 255.
Satellites that belong to the same irrigation zone and will receive the same radio commands may be set to the same
satellite address.
to navigate through the menus and entry fields. Modify any selected value by
Page Monitor Sig
Page History
Radio Menu
Sat Address: 001
Comm Code:
Central
Receive Only Radio
to access the satellite menu selection.
SELECT
SELECT
Page Monitor Sig
Page History
Radio Menu
Sat Address: 001
001
Comm Code:
Central
Receive Only Radio
to access the satellite menu selection.
SELECT
SELECT
. Values will be saved automatically when you exit an entry
will also save any modification and revert back to home display.
Radio Frequency
Radio Information
Radio Send Command
Promiscuous: No
WMX Enable:
Yes
Reset Radio Defaults
to access.
SELECT
SELECT
to access.
SELECT
SELECT
to access.
SELECT
SELECT
to select. Use the
SELECT
SELECT
to access.
SELECT
SELECT
to access.
SELECT
SELECT
Channel: 1
Rx Freq1 462.2125MHz
Tx Freq1 462.2125MHz a
or
arrows to scroll through the six
to activate.
SELECT
SELECT
arrow to access the frequency number.
and use the
or
SELECT
SELECT
to modify each
Advertisement
Table of Contents
