Table of Contents
Advertisement
Troubleshooting
1. If you cannot open the wireless monitor utility, make sure that the PCI
adapter is inserted firmly into the PCI slot.
2. If you cannot connect to the wireless router, you may want to double check
the wireless security settings on the router. The network key you entered in
Step 2.3 must match with the settings on the wireless router.
3. If you are experiencing problems with the connection such as low signal
strength, slow connection speed, or unstable wireless connection, you can try
to tune your router's signal by changing the channels on the router and/or by
adjusting the direction of the antenna(s). You do not need to change the
channel on the Adapter; it will automatically pick up the new channel after you
reboot the router. Your router has 11 different channels to choose from. Keep
going through the channels until you find one that gives you a stable connection.
For instructions on changing channels, refer to the documentation that comes
with the router.
Section 3
Technical Support
E-mail:
support@airlink101.com
Toll Free: 1-888-746-3238
Website:
www.airlink101.com
*Theoretical maximum wireless signal rate derived from IEEE standard 802.11g. Actual data throughput will vary.
Network conditions and environmental factors, including volume of network traffic, building materials and
construction, mix of wireless products used, radio frequency interference (e.g., cordless telephones and
microwaves) as well as network overhead lower actual data throughput rate. Photo of product may not reflect
actual content. All products and trademarks are the property of their respective owners. Copyright ©2009
Airlink101®
Advertisement
Table of Contents
