Page 1
It is recommended that maintenance and repairs be conducted by authorized service agents using genuine Nemco replacement parts. Nemco is not responsible for the damages caused by unauthorized service agents or parts. The information contained in this manual is subject to updates and/or change at the discretion of Nemco Food Equipment without notice.
IMPORTANT SAFETY INSTRUCTIONS When using electrical appliances basic safety precautions i) When cleaning surfaces of door and oven that comes should be followed, including the following: together on closing the door, use only mild, nonabrasive WARNING – To reduce the risk of burns, electric shock, fire, soaps, or detergents applied with a sponge or soft cloth, or injury to persons, or exposure to excessive microwave ii) When separate cleaning instructions are provided, see...
ELECTRICAL INSTALLATION GROUNDING INSTRUCTIONS This appliance must be grounded. In the event of an electrical short circuit, grounding reduces the risk of electric shock by providing an escape wire for the electric current. This appliance is equipped with a cord having a grounding wire with a grounding plug.
IMPORTANT INSTRUCTIONS 1. Read this entire manual before you operate the sandwich press. 2. Only use properly functioning electrical outlets to power the sandwich press. 3. Be sure to frequently wipe away debris from the cooking surface and adjacent surfaces. 4.
Page 6
LONGER THAN A 30 second period. Longer cooking times require larger amounts of moisture or there will be damage to the PaniniPro. If user is interested in warming or browning a dry food product on the PaniniPro, be sure to choose/program a cooking menu that does NOT turn on the microwaves.
INSTALLATION Remove the packaging and all packing material from the sandwich press. Check for any signs of shipping damage. If shipping damage is discovered, contact the shipping company AS SOON AS damage is discovered. LOCATING AND INSTALLING Verify that you have an area on a counter top that is at least 18” wide and that is within 6’ of a 30 amp receptacle that matches the sandwich press plug type.
OPERATING INSTRUCTIONS 1. Once the Press has been located and installed properly it is now ready for use. 2. Toggle the Power Switch to the “ON” position to energize the Press. 3. The Display Area will now display “Pre-Heat”. The press will pre-heat in approximately 15 minutes.
10. When all updates have been completed save the file to the “1150APP” folder on the thumb drive. The file must be saved as a .CSV file and not an Excel spreadsheet. Failure to save the file as a .CSV file will result in failure to upload the new programming. 11.
CONTROL FEATURES POWER SWITCH – Toggle switch to “ON” to energize the control. Turning the switch to “OFF” will power down the control, cancel any menu, and allow the upper enclosure to open. MENU BUTTONS – Pressing any of the menu buttons will cause the red circle next to the corresponding button to illuminate.
CLEANING INSTRUCTIONS NOTE: Proper maintenance plays an important part in the life span and functioning of the sandwich press. To maintain appearance and increase the service life, the sandwich press should be cleaned at least daily. 1. Unplug the power cord and let the cooking plates cool before cleaning or moving. 2.
The warranty provided for herein shall be limited to parts and labor. Any determination that a product is defective or covered by this warranty, shall be made by Nemco, in its sole discretion. The determination of whether to repair or replace a defective, covered product, or to refund the purchase price for the product, will be at Nemco’s sole discretion.
Need help?
Do you have a question about the PaniniPro and is the answer not in the manual?
Questions and answers