Table of Contents
Advertisement
Quick Links
6900-( )-( )
PaniniPro™
INSTALLATION AND OPERATING INSTRUCTIONS
IMPORTANT INFORMATION, READ BEFORE USE
It is recommended that maintenance and repairs be conducted by authorized service agents using genuine
Nemco replacement parts. Nemco is not responsible for the damages caused by unauthorized service
agents or parts. The information contained in this manual is subject to updates and/or change at the
discretion of Nemco Food Equipment without notice. Please read the Installation and Operating
Instructions in its entirety before attempting to install or operate the sandwich press.
Page 1
P: 419.542.7751 ● F: 419.542.6690 ● 800.782.6761 ● nemcofoodequip.com
Advertisement
Table of Contents
Related Manuals for Nemco PaniniPro 6900 Series
Summary of Contents for Nemco PaniniPro 6900 Series
- Page 1 It is recommended that maintenance and repairs be conducted by authorized service agents using genuine Nemco replacement parts. Nemco is not responsible for the damages caused by unauthorized service agents or parts. The information contained in this manual is subject to updates and/or change at the discretion of Nemco Food Equipment without notice.
-
Page 2: Table Of Contents
Product Specifications………………………………..2 Important Safety Instructions……………..3 Installation Instructions………………………………4 Electrical Instructions…………………………………4 Control Features…………………………………………5 Operating Instructions………………………………..6 Important Instructions……………………………..6 Creating & Uploading New a Menu………….7 Cleaning Instructions………………………………….8 Installation Signoff Sheet…………………………..9 Product Warranty……………………………………..10 PRODUCT SPECIFICATIONS Model Number: 6900-VVV-XX Supply Frequency Supply Customer Country Voltage 208 = 208V 60 Hz L1+L2+Gnd (US 30A Plug) GM=General... -
Page 3: Important Safety Instructions
IMPORTANT SAFETY INSTRUCTIONS When using electrical appliances basic safety precautions 10) Do not cover or block any openings on the appliance. should be followed, including the following: 11) Do not store this appliance outdoors. Do not use this WARNING – To reduce the risk of burns, electric shock, fire, product near water. -
Page 4: Electrical Instructions
Remove the packaging and all packing materials from the Sandwich Press. Check for any signs of shipping damage. If shipping damage is discovered, contact the Customer Service Department at Nemco Food Equipment AS SOON AS damage is discovered. LOCATING AND INSTALLING Verify that you have an area on a counter top is at least 18”... -
Page 5: Control Features
CONTROL FEATURES POWER SWITCH – Toggle switch to “ON” to energize the control. Turning the switch to “OFF” will power down the control, cancel any menu, and allow the upper enclosure to open. MENU BUTTONS – Pressing any of the menu buttons will cause the red circle next to the corresponding button to illuminate. -
Page 6: Operating Instructions
OPERATING INSTRUCTIONS 1. Once the Sandwich Press has been located and installed properly it is now ready for use. 2. Toggle the Power Switch to the “ON” position to energize the Press. 3. The Display Area will now display “Pre-Heat”. The press will pre-heat in approximately 15 minutes. -
Page 7: Creating & Uploading New A Menu
CREATING & UPLOADING NEW PROGRAMS 1. Using the USB provided, open the .CSV file in the “1150APP” folder. 2. Set Upper and Lower heater plate Pre-Heat temperatures to desired temperature. No temperature should be set higher than 500 degrees. All temperatures are measured in Fahrenheit. 3. -
Page 8: Cleaning Instructions
CLEANING INSTRUCTIONS NOTE: Proper maintenance plays an important part in the life span and functioning of the Sandwich Press. To maintain appearance and increase the service life, the Sandwich Press should be cleaned daily. 1. Unplug the power cord and let the cooking plates cool before cleaning or moving. 2. -
Page 9: Installation Signoff Sheet
PaniniPro. This should be performed by an Authorized Dealer or Service Agent. Answer the questions provided with a yes or no answer followed by initialing the line. This form must be completed and returned to Nemco Food Equipment. Failure to do so will result in the PaniniPro not being covered under warranty. -
Page 10: Product Warranty
The warranty provided for herein shall be limited to parts and labor. Any determination that a product is defective or covered by this warranty, shall be made by Nemco, in its sole discretion. The determination of whether to repair or replace a defective, covered product, or to refund the purchase price for the product, will be at Nemco’s sole discretion.
Need help?
Do you have a question about the PaniniPro 6900 Series and is the answer not in the manual?
Questions and answers