Adaptec 2126900-R Manual page 4

Insert the USB2connect into the PCI expansion slot. Press down
S 4
TEP
firmly until the card clicks into place.
Replace the slot cover screw. When installed properly, the card
S 5
TEP
should be level with the expansion slot, as shown below.
N
OTE
the card completely.
Close the computer cabinet and reattach the power cord.
S 6
TEP
Some PCI slots may need considerable force to insert
3
Note: This
figure shows
the AUA-
3100LP card.
The 5100 fits
in the slot the
same way.