Initialisation Instructions; Height Adjustment Controller; Initialization / Reset Process; Lock / Unlock Controller - IKEA UPPSPEL Manual

INITIALISATION INSTRUCTIONS:

Step 1. Continuously press the
Step 2. Continuously press the
Step 3. Continuously press the
desk stops moving and the display shows "72", it is ready to use.

HEIGHT ADJUSTMENT CONTROLLER

LED Display for Actual Height
— LED Display: Press any key once to wake up the LED display.
— Up key : Press and hold to raise the desk.
— Down key : Press and hold to lower the desk.
— Memory setting:
— To save this current height: Press the button
memory button
— For Example, if you press
— Memory button
NOTE!
— The desk's movement can be stopped at any time by pressing any button.
— Height settings will remain even if the desk's power is cut

INITIALIZATION / RESET PROCESS:

Step 1: Press/hold the
Step 2: Press/hold the
Step 3: Press/hold the
the display shows "72", your desk is ready to use.

LOCK / UNLOCK CONTROLLER

Lock the controller: Press and hold the
Unlock the controller: Press and hold the
height of the table.
button for a few seconds until the desk reaches its lowest position.
button a second time until the display shows "RST".
button a third time until the desk moves slightly downwards. When the
Up Key
Down Key
+ , , , :
, , , . This will bind the height to this number.
, the display will show "S-1" etc...
, , ,
button for a few seconds until the table reaches its lowest position.
button a second time until the display shows "RST".
button a third time until the table slowly lowers. Once the table stops moving and
for 10 seconds until the display shows "LOC".
Memory 1
Memory 2
, the display will show "S-", then press preferred
symbol for 10 seconds until the display shows the actual
Memory 3 Memory Setting
Memory 4