AEG DBS3350 Manual page 25

Operating instructions
1. Connect the steam generator
GB
iron to the mains supply. Press the
power button. When the power
switch is pressed, the power
indicator will illuminate. Wait for
one to two minutes, until the steam
lamp lluminates. Select the steam
level between Low - Medium and
High. See Ironing chart for ironing
recommendation.
4. To turn off the iron by pressing
the power button for a while, until
a beep will sound. If the iron is left
unattended on the iron rest, it turns
automatically off after 10 minutes.
A
B
2. if the lower water level indicator is
illuminated (A) (followed with two
beep sounds), refill the water tank.
After refilling the water tank, press and
hold the refil reset button (B) for about
6 seconds. The refill reset button will
be extinguished. Steam can now be
used again.
5. Always cool the iron fully on the iron
rest before stowing away. Once the
iron is cool, empty the water tank.
Store the steam generator iron
3. To activate the steam, press the
steam button. When releasing the
button, use up the steam before
putting it back on the iron rest of the
steam station.
6. Always store the cord winded safely
by the side of the iron. NEVER wind the
power cord around the iron
D
GR
NL
F
GB
25