To Remove A Pc Card - Sony PCG-FXA32 Primary User Manual

Change text in this variable definition to document title.

To remove a PC Card

The following procedure describes how to remove the PC Card while the
notebook is on. If you want to remove the PC Card while the notebook is off,
perform steps 4, 6, and 7 below.
1 Double-click
appears.
2 Click the PC Card's name or drive. The message, "Safe to Remove
Hardware" appears.
3 Click to close the message.
4 Push the Release button. The Release button pops out.
5 Click OK again and then click Close.
6 Gently grasp the PC Card and pull it out of the slot.
7 Insert the PC Card slot protector into the empty slot.
Notes on using PC Cards
For some PC Cards, if you alternate between normal power operation and
the Standby or Hibernate power management modes while the card is
inserted, you may find that a device connected to your system is not
recognized. Restart your system to correct the problem.
Some PC Cards may require that you disable idle devices when using the PC
Card.
Be sure to use the most recent software driver provided by the PC Card
manufacturer.
If an exclamation mark (!) appears on the Device Manager tab in the System
Properties dialog box, remove the software driver and then reinstall it.
You may not be able to use some PC Cards or some functions of the PC Card
with this notebook. If you have difficulty inserting a card, check that you are
orienting the card correctly. See the manual that came with your PC Card for
more information on its use.
28
in the taskbar. The "Safely remove ... PC Card" dialog box