Settings Menu; Video Settings - Gazer F230w User Manual

EN
RESOLUTION
WI-FI
TIME LAPSE
RECORDING
CYCLE (MIN.)
IMAGE
RESOLUTION
EXPOSURE
WHITE
BALANCE
WDR
MOTION
DETECTOR
PARKING MODE
G-SENSOR
SETTINGS
SOUND
RECORDING
DATE/TIME
WATERMARK
LICENSE PLATE
LICENSE PLATE
WATERMARK
14

Settings menu

Video settings

1080FHD 1920x1080; 720P 1280x720; WVGA
848x480; VGA 640x480
Recorded video resolution settings.
Recommended mode 1080FHD 1920х1080.
On; Off
Turning the built-in Wi-Fi module on and off.
Off; 15Fps; 10Fps; 5Fps
Time Lapse mode video recording settings.
Off; 1 min; 3 min; 5 min; 10 min
Loop video duration settings.
Recommended video clip duration: 1 minute.
12M 4032x3024; 10M 3648x2736; 8M 3264x2448; 5M
2592x1944; 3M 2048x1536; 2MHD 1920x1080; VGA
640x480; 1.3M 1280x960
Photo resolution settings.
+2/3; +1/3; +0.0; -1/3; -2/3; -1.0; -4/3; -5/3; -2.0
Image exposure settings.
Auto balance; Sunny; Cloudy; Tungsten; Fluorescent
Settings of the compensation of incorrect color mapping
caused by inhomogeneous light sources.
On; Off
Enable/Disable wide dynamic range.
Off; Low; Medium; High
Enable and set up motion detection sensitivity.
Remember that loop recording is switched off when the
motion detector is on, which may cause the memory card to
be overfilled and the recording to stop.
On; Off
Enable/Disable parking mode.
Off; Low; Medium; High
Setup of three-axis acceleration sensor sensitivity.
Files recorded when the G-sensor is activated (abrupt
acceleration, braking, blow) are automatically protected from
deletion during loop recording.
On; Off
Enable/Disable sound recording.
On; Off
Enable/Disable date and time watermark.
Setup of custom watermarks.
It is recommended to set up values corresponding to the
vehicle license plate number.
On; Off
Enable/Disable custom watermarks (license plate).