Bushnell ONIX 363500 Quick Start Manual page 23

using your oniX350 gPs receiVer : name & icon editing
You will see the SafeTrack screen (Fig. 43), with a count down delay (time can
be adjusted in the Set Page Menu) before the unit enters SafeTrack mode. If you
accidentally hold the HOT button down, select "Cancel" and press OK. If you
do not cancel, at the end of the countdown, the unit will be in SafeTrack mode.
The display will black out. The ONIX will automatically make GPS satellite
contact every 5 minutes (default, can be changed in SafeTrack Options menu),
which extends battery life significantly while still allowing you to instantly get a
fix on your location and resume navigation when you exit SafeTrack mode.
Fig 43.
As long as you are actively using the GPS and pressing buttons (within time
SafeTrack
limit set in SafeTrack options (Fig. 44), the screen display will stay active-but
Screen
the unit is still in SafeTrack mode.
After a period of inactivity (length of time selectable in SafeTrack options menu),
the Start SafeTrack screen (Fig. 43) will appear.
If you do not want to return to SafeTrack, press OK or LEFT with "Cancel"
selected.
How to Create/Edit Names for Waypoints, Trails, Map Areas, etc.
(Using the Type Tool)
With "Edit Name" selected, click OK to bring up the Type Tool, a "virtual
Fig 44. SafeTrack
keyboard" (Fig. 45). This is a multi-function tool that is controlled by the 5-way
Options
button. Your currently selected character is highlighted. Move LEFT/RIGHT
(select "Options"
or UP/DOWN to select letters, then press OK to enter your selected character-
from SafeTrack
you'll see it appear in the name near the top of the display. Use the LEFT/
Screen)
RIGHT keys to move around in a row (it "wraps around" when you go past
the 1st or last character in a row), and use UP/DOWN to move through the
columns. The Text Tool automatically switches to lower case after starting a
word with upper case, but you may use "SHIFT"(select, press OK) to change it
anytime. Use "back" to backspace if you make a mistake, or to delete the default
"WPT 000" assigned to a new waypoint before starting to "type" your preferred
name for it. To switch from letter characters to numbers or symbols, press the
"+" or "-" buttons (you will see the tabs at the top of the Text Tool change).
Once you are finished creating or editing the name for your waypoint, trail, etc,
Type Tool-
Fig 45.
be sure to select "done" and press OK to actually confirm and enter the name in
Editing a
the memory of the ONIX350.
Waypoint Name
How to Set or Edit Icons
With "Edit Icon" selected, click OK and the display will show a menu of icons
(Fig. 46), or common symbols, that you may choose to represent your waypoint
on the map. If you have previously set up a user profile for a particular type
of activity (for example, camping), the group of icons that appears in the icon
selection menu will be the ones most relevant to that activity. Simply use the
LEFT/RIGHT and UP/DOWN keys to move around the available icons, press
OK to select one (you will see it appear next to the name at the top of the
Waypoint
Fig 46.
display), then select "done" and press OK again to confirm and enter the icon,
23
"Edit Icon"
so it appears on the map along with the name.