Table of Contents
Advertisement
Triangle with exclamation mark: Read the manual before installation
and commissioning of the device in order to avoid incidents that could
lead to personal injury or mechanical damage. Warning / demand.
Potentially lethal situations.
The CE-Mark proves the compliance of the device with the essential
requirements of the directives.
The double insulation symbol shows that the device is protected by
double or reinforced insulation.
2. transport, packaging and storage
2.1 transport
Inspect the device for any damage that may have occurred during transport. Report
obvious damage immediately.
2.2 packaging
Do not remove the packaging until immediately before assembly. Keep the packa-
ging, because it provides optimal protection during transport (e. g. changeable in-
stallation location, return).
2.3 storage
Avoid the following influences during longer storage:
- Direct sunlight or close to hot objects
- Mechanical vibration, mechanical shock (hard set up)
- Soot, steam, dust and corrosive gases
If possible, store the device in the original packaging or appropriate packaging.
promesstec GmbH I Niedersachsenstraße 4 I D- 48465 Schüttorf I Tel.:+49 (0)5923/ 90 229 0 I Fax:+49 (0)5923/ 90 229 29
E-Mail: office@promesstec.com I Internet: www.promesstec.com
5
Advertisement
Table of Contents
