2-3
Front Panel LED and Buttons
No. Name
System
1.
Status LED
2.
Reset Button
Power button
3.
with LED
ID Button
4.
with LED
Enclosure CMC
5.
Reset Button
System Appearance
1
3
1
3
1
3
1
3
Color
Status
Green
On
System is operating normally.
Critical condition, may indicates:
On
System fan failure
System temperature
Amber
Non-critical condition, may indicates:
Blink
Redundant power module failure
Temperature and voltage issue
Non-critical condition, may indicates:
N/A
Off
Redundant power module failure
Temperature and voltage issue
--
--
Press this button to reset the system.
Green
On
System is powered on
Green
Blink
System is in ACPI S1 state (sleep mode)
•
N/A
Off
•
Blue
On
System identification is active.
N/A
Off
System identification is disabled.
--
--
Press this button to reset the CMC.
2
1
RST
4
2
2
RST
4
3
2
RST
4
4
2
RST
4
C
5
RST
Description
System is not powered on or in ACPI S5 state (power
off)
System is in ACPI S4 state (hibernate mode)
- 19 -