Table of Contents
Advertisement
Expansion Slots Per node:
Š
Š
Š
Š
Š
Š
Š
Total:
Š 4 x Low profile half-length slots with PCIe x16 (Gen4 x16 bus)
Š 4 x Low profile half-length slots with PCIe x16 (Gen3 x16 bus)
Š 4 x OCP 2.0 mezzanine slot with PCIe Gen3 x16 bandwidth (Type1, P1, P2, P3,
Š
Š
Š
Š
Video
Š
Š
Š
Per node:
Storage
Š
Total:
Š
SAS card is required for SAS devices support
Per Node:
Internal I/O
Š
Š
Š
Š
Š
Š
Š
Š
Š
1 x Low profile half-length slots with PCIe x16 (Gen4 x16 bus)
1 x Low profile half-length slots with PCIe x16 (Gen3 x16 bus)
1 x OCP 2.0 mezzanine slot with PCIe Gen3 x16 bandwidth (Type1, P1, P2, P3,
P4 with NCSI supported)
2 x M.2 slots:
- M-key
- PCIe Gen3 x4
- Supports NGFF-2242/2260/2280/22110 cards
P4 with NCSI supported)
8 x M.2 slots:
- M-key
- PCIe Gen3 x4
- Supports NGFF-2242/2260/2280/22110 cards
Integrated in Aspeed® AST2500
2D Video Graphic Adapter with PCIe bus interface
1920x1200@60Hz 32bpp, DDR4 SDRAM
6 x 2.5" SAS/SATA hot-swappable HDD/SSD bays
24 x 2.5" hot-swappable HDD/SSD bays
2 x M.2 slot
1 x USB 3.0 header
1 x TPM header
1 x OCP 2.0 mezzanine slots
1 x Front panel header
1 x Back plane board header
1 x IPMB connector
1 x Clear CMOS jumper
1 x BIOS recovery jumper
- 13 -
Hardware Installation
Advertisement
Table of Contents
