Table of Contents
Advertisement
112
9
Select YES to Save Configuration and press any key to return to the
Configuration menu.
10 Press ESC to return to the Management Menu
Initialing a RAID Volume
1
Select Initialize from Management menu. All logical drives should
be listed under Logical Drives.
2
Press Spacebar to select drives for initialization. The selected drive
will be shown in yellow.
3
After selecting the drives, press F10 and select YES to start the
initialization process.
4
When initialization is complete, press ESC to continue.
5
Press ESC to return to the Management Menu.
Assigning a Hot Spare Drive
1
Select Objects from Management menu.
2
Select Physical Drive from Objects. All of the HDDs will be listed.
3
Select a drive marked as READY and press Enter.
4
Select Make Hot Spare and press Enter.
5
Select Yes then you will see the HDD is changed from READY to
HOTSP.
6
Press ESC to return to the Management Menu.
Appendix A: Server management tools
Advertisement
Table of Contents
Troubleshooting
