Techno Line WT268 Instruction Manual page 28

that it will not enter the receiving status again whatever
successful or not. RCC receiving time is 7 minutes.
2. During receiving, RCC tower icon flashes at 1HZ. After
RCC is received, RCC tower will show on the LCD. If no
signal is received, there will be no tower icon
3. When the RCC symbols display fully, the relative RCC icon will
be OFF if reset the time.
4. When the RCC is receiving, all keys have not function except
"SNOOZE/LIGHT" and "DOWN"
5. RCC receiving will automatically exit when alarm rings
6. During RCC receiving, press DOWN to adjust the RCC
system with the sequence: DCF→ MSF → WWVB →JJY
→ EXIT